MS-4GB-4012Gantry Pipe and Plate integrated cutting machine

Short Description:

Meisar Gantry Pipe and Plateintersection cutting machine can achieve two kinds of tube and plate cutting method, can greatly save customers cost.

The machine can cut a plurality of cylinder with different direction, different diameter of intersecting line hole, meet the vertical axis and axis condition branch director and no eccentric. The machine can also cut cylinder intersection line at the end of branch pipe, meet the pipe axis and the eccentric and no eccentric director axis intersecting condition.


Product Detail

Product Tags

Features

  1. The whole machine adopts the welded steel plate welded structure. The beam is cut by laser cutting and then welded together. The upper and lower sides of the beam are bent by 90 degrees with the steel plate, which can reduce the deformation and increase the rigidity.
  2. The beam hanging plate is welded with 20mm steel plate, and the whole surface is processed by gantry planer to reduce the deformation of the whole surface and improve the precision.
  3. After the whole machine is welded, firstly, the aging treatment is performed after stress aging, followed by the surface rust removal treatment. After the primer is applied, the surface is painted.

Technical parameter

Model

MS-4GB-4012

Overall size

4000×12000

Effective cutting range

3000 x 10000mm

Round tube cutting length

12000mm

Cutting tube diameter

Φ50-500mm (can be customized according to customer requirements)

Operating accuracy

0.2mm/m

Pip bearing weight

2000KG

Numerical control linkage number

3-axis 2 linkage

Number of supports

4 sets

Tube ellipticity

≤2%

 Cutting type

tandard: flame + plasma dual-purpose cutting (can be customized)

transfer method

Gear rack drive

Torch lift

≤160mm

Flame cutting thickness

Piercing thickness: 5-60mm Edge cutting thickness: 5-200mm

Plasma cutting thickness

According to the size of the plasma power supply

Gas supprfy requirements

Acetylene / propane gas pressure ≤0.1 MP

Oxygen supply requirements

Oxygen maximum pressure ≤1MP

Cutting table infrastructure

We will provide the gantry cutting table drawing for the user reference (basic equipment and H-beam by the customer to buy)

 

gantry cnc cutting machine_04gantry cnc cutting machine_05

 

gantry cnc cutting machine_06龙门板管详情


  • Previous:
  • Next:

  • Write your message here and send it to us