OEM/ODM Supplier Plasma Source - Gantry type CNC flame straight cutting machine – Meisar

Short Description:

Product Detail

Product Tags

Feedback (2)

Attaining consumer satisfaction is our firm's purpose for good. We'll make wonderful efforts to produce new and top-quality merchandise, meet up with your special necessities and supply you with pre-sale, on-sale and after-sale products and services for Cnc Plasma Pipe Cutting Machine , Cnc Steel Cutting , Table Plasma Cutting Machine , Our concept would be to assist presenting the confidence of each prospective buyers while using the offering of our most honest service, as well as right merchandise.

OEM/ODM Supplier Plasma Source - Gantry type CNC flame straight cutting machine – Meisar Detail:

Features

The whole machine adopts the welded steel plate welded structure. The beam is cut by laser cutting and then welded together. The upper and lower sides of the beam are bent by 90 degrees with the steel plate, which can reduce the deformation and increase the rigidity.

This equipment adopts manual adjustment (also can be equipped with overall lifting adjustment) to cut the gun. This equipment comes standard with wireless remote control device, which can operate the straight cutting torch more conveniently and improve work efficiency.

Technical parameter

Model	MS-5B-3280	MS-5B-4010	MS-5B-5012	MS-5B-6012
Machine structure	Laser cutting, steel plate weWing structure with heat treatment
Rail spacing	3200mm	5000mm	6000mm	7000mm
Rail length	8000mm	10000mm	12000mm	12000mm
Effective cutting range	2300 x 6000mm	3000 x 8000mm	4000 x 10000mm	5000 x 10000mm
Input voltage	Single phase AV-220V
input power	1800W	2600W	3200W	3200W
Running speed	0-10000mm/min
Operating accuracy	0.2mm/m
Number of straight cut guns	Customized according to customer requirements
Torch lift	≤ 160mm
Flame cutting thickness	Piercing thickness: 5-60mm Edge cutting thickness: 5-200mm
Plasma cutting thickness	According to the size of the plasma power supply
Flame automatic ignition device	With flame automatic ignition device function
Gas supply requirements	Acetylene / propane gas pressure ≤ 0.5MP
Oxygen supply requirements	Oxygen maximum pressure ≤ 1.5MP
Cutting table infrastructure	We will provide the gantry cutting table drawing for the user reference (basic equipment and H-beam by the customer to buy)

Cutting Sample

vv (3)
vv (2)
vv (1)

Product detail pictures:

Related Product Guide:
How to choose a CNC plasma cutter

All we do is usually connected with our tenet " Consumer initial, Rely on 1st, devoting around the food stuff packaging and environmental safety for OEM/ODM Supplier Plasma Source - Gantry type CNC flame straight cutting machine – Meisar , The product will supply to all over the world, such as: South Korea , Puerto Rico , Mombasa , Aiming to grow to be by far the most experienced supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal merchandise. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. In depth data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're about to make it possible for you to get complete acknowledge about our things and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.

Esab