Good quality Thermal-Dynamics - MS-4GB-4012Gantry Pipe and Plate integrated cutting machine – Meisar

Short Description:

Product Detail

Product Tags

Feedback (2)

Adhering for the theory of "quality, services, performance and growth", we have received trusts and praises from domestic and worldwide shopper for Pipe Cutting Equipment , Cnc Laser Tube Cutting Machine , Plasma Cutting Machine , Special emphasis on the packaging of products to avoid any damage during transportation,Detailed attention to the valuable feedback and suggestions of our esteemed clients.

Good quality Thermal-Dynamics - MS-4GB-4012Gantry Pipe and Plate integrated cutting machine – Meisar Detail:

Features

The whole machine adopts the welded steel plate welded structure. The beam is cut by laser cutting and then welded together. The upper and lower sides of the beam are bent by 90 degrees with the steel plate, which can reduce the deformation and increase the rigidity.
The beam hanging plate is welded with 20mm steel plate, and the whole surface is processed by gantry planer to reduce the deformation of the whole surface and improve the precision.
After the whole machine is welded, firstly, the aging treatment is performed after stress aging, followed by the surface rust removal treatment. After the primer is applied, the surface is painted.

Technical parameter

Model	MS-4GB-4012
Overall size	4000×12000
Effective cutting range	3000 x 10000mm
Round tube cutting length	12000mm
Cutting tube diameter	Φ50-500mm (can be customized according to customer requirements)
Operating accuracy	0.2mm/m
Pip bearing weight	2000KG
Numerical control linkage number	3-axis 2 linkage
Number of supports	4 sets
Tube ellipticity	≤2%
Cutting type	tandard: flame + plasma dual-purpose cutting (can be customized)
transfer method	Gear rack drive
Torch lift	≤160mm
Flame cutting thickness	Piercing thickness: 5-60mm Edge cutting thickness: 5-200mm
Plasma cutting thickness	According to the size of the plasma power supply
Gas supprfy requirements	Acetylene / propane gas pressure ≤0.1 MP
Oxygen supply requirements	Oxygen maximum pressure ≤1MP
Cutting table infrastructure	We will provide the gantry cutting table drawing for the user reference (basic equipment and H-beam by the customer to buy)

Product detail pictures:

Related Product Guide:
How to choose a CNC plasma cutter

All we do is usually connected with our tenet " Customer to start with, Rely on initial, devoting on the food packaging and environmental protection for Good quality Thermal-Dynamics - MS-4GB-4012Gantry Pipe and Plate integrated cutting machine – Meisar , The product will supply to all over the world, such as: Liberia , Angola , Belize , We put the product quality and customer's benefits to the first place. Our experienced salesmen supply prompt and efficient service. Quality control group make sure the best quality. We believe quality comes from detail. If you have demand, allow us to work together to get success.

Blackwalf